Skip to content

Country

Placement Size of Name on Back of Shirt

Placement Size of Name on Back of Shirt

 

There are many advantages to placement your name on the back of a shirt. It is flattering and more forgiving than the front, and it covers a larger area. It is also a better choice for larger names. Here are some tips to help you make the right choice: Measure your name from the center of the collarline, sleeve, and neckline.

 

Measure 2" - 3" down from the center of the neckline

 

To place a name on the back of a shirt, measure two to three inches down from the center of the neckline. For youth t-shirts, the design should be about 3" x 3". On toddler t-shirts, the design should be 1.5" - 2" down from the neckline.

 

To make the name on the back of the shirt appear more pronounced, it is best to make it as small as possible. You can also choose a large font for a big design. If you have a large font, try making your design a little smaller than the actual size of the design to fit.

 

If you are using a standard size font, you can start the design 2" - 3" down from the neckline. Alternatively, you can start a design 2.5" - 3" down from the center.

 

The back of the shirt is the best spot for a logo or name. The back portion is the most visible, so you should consider placement carefully. Measure two to three inches down from the center of the neckline and place the design between the left and right seams.

 

To make the measurements, you should lay the shirt flat on a hard, flat surface. Pull it tight, but do not stretch it. Then lay the measuring tape on top of the shirt sleeve and repeat the measurement on the other side. The length of the shirt is 23" on the flat surface.

 

Measure 2" - 3" down from the center of the sleeve

 

The bottom of the design should fall two to three inches below the center line of the sleeve if you are placing a large design. If the design is smaller than this, the design should fall approximately one inch below the center line of the sleve.

 

The center crease of a sleeve is a good spot for placement of the name on the back of shirt. Measure two or three inches down from the center of the sleve and mark the location where the name should be placed.

 

The sleeve length of a youth or toddler t-shirt should fall between seven and nine inches. For adult small and medium sizes, the name should fall about three inches below the center of the sleeve.

 

Back Collar placement is another popular choice. It is more flexible and forgiving than the front and has the advantage of covering a larger area. It's also a great place for your logo.

 

When placing the name on the back of shirt, it's important to remember that the best placement depends on the size of the shirt and the placement of the design. If you choose the right location for the name, the logo should be about three to four inches wide. The right placement is a great option for a small logo, but a big design will likely be difficult to see.

 

The placement guide cutouts can be used to help you determine the center of the shirt's collar. They can be purchased in different sizes and placed around the collar of an appropriate sized shirt. Then touch the edge of the sheet to transfer the placement guide.

 

Measure 2" - 3" down from center of sleeve for placement of name, if the shirt has a center seam. Using this measurement method, you can place the name on the back of shirt at the center of the sleeve.

 

Measure 2" - 3" down from the center of the collarline

 

When placing the name on the back of the shirt, remember to keep the design 2" - 3" below the center of the collarline. For larger sized shirts, measure two inches further from the center of the neckline.

 

For a toddler t-shirt, measure two to three inches down from the center of the collarline. In youth sizes, the t-shirt should be about three inches wide. It is best to use a font that is approximately 3" high, as it will look better on a smaller shirt.

 

To place the name on the back of a shirt, use a T-Shirt Measurement Tool to measure the name. It is easy to use and does not require you to be an expert in t-shirt design. Just make sure that the design is centered properly before pressing it.

 

The shoulder slope on the back of the shirt should be about 2.2 cm wide. This will create additional ease at the chest. After measuring the chest and shoulder slopes, you should draw a parallel line 4.2 cm down from the chest and waist lines to get the right height.

 

The measurements are easy to follow if you follow a few steps. First, lay the shirt flat on a hard, smooth surface. Ensure that the collar band is properly placed on the shirt.

Then, lay the shirt flat on the back with the back facing upwards. Then, place the measuring tape at this point and measure again from the other side. If the shirt is not properly centered, the measurement will be incorrect.

 

Secondly, measure the center of the collarline. This is the centre point of the shirt. You can also measure the center front and centre back lines. Lastly, you can mark a gap in the pattern at the centre back to match the collar length.

Older Post
Newer Post
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Added to cart